LHY型-冶金电动葫芦桥式起重机=冶金起重机/铸造起重机
LHY type electric metallurgical hoist overhead crane=metallurgical crane/casting crane
产品说明 Product Description
LHY型-电动葫芦桥式起重机,天车,行车, (简称冶金葫芦双)是以固定式钢丝绳葫芦作为起升机构,安装在集中驱动的双轨小车上,与双梁桥架配套使用.主要用于机械制造车间、仓库、料场、水电站检修、装配等场所。 本系列产品设有司机室操纵和地面操纵两种形式。
1、主梁特点,从普通A3双梁起重机,升级到A6级别,工作级别上升2级。工作制度更高,主梁强度更大,并在起重机底部加注隔热防护层,内填充隔热石棉。以预防高温熔融金属对起重机的炙烤,防止起重机主梁变形,
2、机构部分:所有运行机构增加防护等级,由于环境温度的上升,所有运行电机的防护等级增加为H级绝缘。,冶金专用吊钩,耐高温钢芯钢丝绳,冶金电动葫芦,硬齿面减速机,电动葫芦增加双制动单元。
3、电器部分:增加耐高温电缆,电控部分防护等级更高。
名称 Title |
单位 Unit |
规格 Specs |
额定起重量 Load: |
Gn |
5T,10T,16T,20T,32T,50t |
跨度 Span: |
S |
7.5m-30m |
提升高度 Lifting Height: |
H |
6m-22m |
工作电源 Power source |
|
3p A.C 50HZ 380V |
工作级别 Class: |
jc |
A6 JC=40% |
注:Gn=起重额定吨位 S=跨度(左轨道中心至右轨道中心的距离) H=提升高度(地面至吊钩最高点的距离)
Product Description
LHY - type electrical hoist bridge crane,crown block,travelling crane,(for short double metallurgy hoist) equipped with fixed wire rope hoist as lifting mechanism, installed in the centralized driven dual track car, with double girder frame. Mainly used for mechanical manufacturing workshop, warehouse, yard, hydropower station, maintenance, assembly and so on. This series product is equipped with the driver room manipulation and ground controlling two forms. 1, Characteristics of main girder, from ordinary A3 double beam crane upgrade to the level of A6, work level upgrade to 2 levels rise.Higher working system, main girder more strength and refill insulation protective layer at the bottom of the crane, fill inside insulation asbestos.In order to prevent high temperature molten metal to grilled crane and prevent deformation of crane girder. 2,Institutions: all run institutions increase protection grade, due to temperature rising, all motor running for class H insulation protection level.Special metallurgy hook, high temperature resistant steel core wire rope, metallurgical electrical hoist, machine of decelerate of hard tooth flank, increase double electric hoist braking unit. 3,Electrical parts: increase the high temperature resistant cable, electrical control part of the protection grade is higher.
Title |
Unit |
Specs |
Load: |
Gn |
5T,10T,16T,20T,32T,50t |
Span: |
S |
7.5m-30m |
Lifting Height: |
H |
6m-22m |
Power source |
|
3p A.C 50HZ 380V |
Class: |
jc |
A6 JC=40% |
Gn=Rated lifting tonnage S=span H=hoisting height
中华人民共和国特种设备制造许可证
Manufacture License of Special Equipment People's Republic of China
山东龙辉起重机械有限公司 http://www.lhqzj.com
Shandong Longhui Hoisting Machinery CO.,LTD Website: http://www.lhqzj.com |