DEMAG DCMS-pro manual hoist 德马格变频调速环链葫芦的优点:高质量, 敏感元件使定位准确，上升、下降平稳。 安装定位更加准确，起升更加快速，如果部分载荷，额定速度几乎可倍增，新型变频调速 DCS-Pro 和 DCMS-Pro 环链葫芦使您的工作更高效、安全，控制元件和变频器集成在结构紧凑的电控模块内，节省空间。 相比DC-Pro 葫芦的二级速度, 新型德马格 DCS-Pro 和 DCMS-Pro环链葫芦给你提供更多的优点： 在任何负载下，上升、下降无限制无级变频。 从 0,15 m/min (DCS-Pro 1/2) 至 0,08 m/min (DCS-Pro 5)的微速提升。 起动平稳、定位准确。 调速比 1:200，定位准确，运行高速。 Pro-Hub效应: 部分载荷或无载荷时，额定速度可增加90％。 可通过软件实现由快到慢直至切断电源: 在到达上 / 下极限位置之前自动转换为微速运行。 采用PWM 手电门，手电门有10 mm的按压行程，使运行平稳，操作舒适。 平缓的加速和制动防止了负载的摇摆。 起升速度、起制动加速度可以通过手电门调整。 电机温度监测装置，增加安全性 宽范围输入电压: 380 - 480 V / 50 - 60 Hz 采用E11/E22,DCS-Pro的大小车运行速度为无级变速。 全部特性无额外加费用 德马格 DCS-Pro环链葫芦的许多特性都作为标准配置集成在内，无需额外选配，这是“标准配置－德马格制造”，给你的投资带来额外的价值。 24 V 操作电压确保操作安全可靠。 减速箱、制动器和离合器10年免维护设计。 离合器速度监测系统确保过载时有效切断电源。 制动－离合器系统确保吊重可以在任何位置安全起吊。 控制部件，电机，制动器采用插接式连接，使安装维修更加方便。 便利的维修检测区，可方便快速对葫芦进行维修：所有电器接线采用即插即用的连接方式，可调节手电门控制电缆高度，链轮润滑。 可方便快速地调节手电门控制电缆高度。 DSC-S的插接式手电门使操作舒适，不易疲劳。 2 种悬挂支架 (长型和短型) U 11/U 22 小车可根据轨道快速方便地调节宽度，方便安装。 显示累计工作时间、工作状态指示和故障监测信息，可以预先安排维修保养计划 无需拆卸电机或齿轮部件，可快速方便地更换整个链轮。 DCS-Pro 使用灵活，安装快速，操作方便。 德马格DCMS-Pro 手控葫芦 DCMS-Pro手控电动葫芦单手即可控制，安全快速地吊运负载，无级变速，象DCM-Pro一样, 它是建立在DC-Pro环链葫芦和DSM-CS控制单元基础之上，DSM-C控制单元被用螺旋电缆连接到环链葫芦上。 由于控制单元与吊具的刚性连接使操作人员只需单手（左手或右手）操作葫芦，引导负载。快速更换耦合器实现了各种吊具的轻松更换。 行走无级变速，降低负载摇摆 无论使配U11/U22手拉小车还是沿KBK轨道，DCS-Pro都可以简单地手拉行走，也可以配上新型E 11/E 22行走驱动实现电动行走，它们可以快速地和手动小车匹配，E 22行走驱动也用于KBK RF 125摩擦行走驱动。 DCS-Pro大小车行走都是无级变速 行走速度从0.5 到 24 m/min, 如果是部分载荷最高速度可达30 m/min 24V控制电压 即插即用连接 启动及快慢转换开关限位集成在控制卡内 平滑起动、制动 根据需求，可以配以下功能: 按照客户要求，可通过DSE-10CS 手电门调节速度、加速度及制动速率. 小车运行平稳，负载摇摆少
Demag frequency control of motor speed chain hoist advantages: high quality, sensitive element to make accurate location, up and down smoothly.
Install more accurate positioning, lifting more quickly, if part of the load, the rated speed can be doubled, almost new frequency control of motor speed DCS - Pro and DCMS - Pro chain hoist to make your work more efficient, safe, control components and inverter integration within the compact structure of the electronic control module, save a space.
Compared to the secondary speed of DC - Pro gourd, new type of demag DCS - Pro and DCMS - Pro chain hoist give you more advantages:
Under any load, unlimited stepless frequency conversion of rise and fall.
From 0, 15 m/min (DCS - Pro 1/2) to zero preceding m/min (DCS - Pro 5) dead slow ascent.
Stable starting, accurate positioning.
Speed than 1:20 0, precision positioning, high-speed operation.
Pro - Hub effect: part load or no load, the rated speed can be increased by 90%.
Can be realized through software from fast to slow and to cut off the power supply: before reaching the limit position of up/down automatically convert dead slow running.
Using PWM flashlight door, flashlight door has 10 mm on the trip, smooth operation, operation and comfortable.
Smooth acceleration and braking prevents the load swing.
Hoisting speed, the brake acceleration can be flashlight door adjustment.
The motor temperature monitoring device, increase security
Wide range of input voltage: 380-480 - V / 50 to 60 Hz
Use E11 / E22, DCS - Pro big car running speed stepless variable speed.
All features without extra charge
Demag DCS - Pro chain hoist, many of the features are as standard integration, no additional matching, this is "standard configuration - demag manufacturing", bring additional value of your investment.
24 V voltage to ensure safe and reliable operation.
Reducer, brake and clutch 10 years of free maintenance design.
Clutch speed monitoring system to ensure that the overload effective when cut off power supply.
Brake and clutch system to ensure safe lifting trolley can be in any position.
Control parts, motor, brake use plug type connection, make the installation and maintenance more convenient.
Convenient maintenance testing area, to facilitate rapid gourd for repair: all electrical wiring plug and play connection method, the adjustable flashlight door control cable height, sprocket lubrication.
Can be fast and convenient to adjust the flashlight door height control cable.
DSC -s plug type flashlight door to make operation and comfortable, not easy to fatigue.
Two kinds of suspension bracket (long and short)
U/U 11 22 car width can be adjusted according to the orbit quickly and easily, convenient installation.
According to the cumulative working hours, working status indication and fault monitoring information, you can arrange maintenance plan in advance
Don't need to remove the motor or gear components, the sprocket can be quickly and easily replaced.
DCS - Pro use of flexible, rapid installation, convenient operation.
Demag DCMS - Pro manual gourd
DCMS - Pro manual electric hoist can control, one hand safety lifting load quickly and infinitely variable speed, like DCM - Pro, it is based on the DC - Pro chain hoist and DSM - CS based on the control unit, the DSM - C control unit used spiral cable connected to the chain hoist.
Due to the control unit and spreader of rigid connection makes the operators only need one hand (left hand or right hand) operation gourd, guide the load.Quick change of the coupler has realized various sling easy replacement.
Infinitely variable speed, reduce the load swing
Make the U11 matching/U22 hand to pull the car or the KBK orbit, DCS - Pro can simply hand walk, can deserve to go up the new E/E 11 22 drive electric walking, walking they can quickly and manual car matching, 22 E drive is used to walking KBK RF walk 125 friction drive.
DCS - Pro big tractor is stepless variable speed
Walking speed from 0.5 to 24 m/min, if it is part of the load the top speed of 30 m/min
24 v control voltage
Plug and play connection
Start-up and speed switch limit integration within the control card
Smooth starting and braking
According to the demand, can match the following functions:
According to the customer request, can through the DSE arithmetic - 10 cs flashlight door to adjust speed, acceleration and braking rate.
The car running smoothly, the load swing
Shandong Longhui Hoisting Machinery CO.,LTD Website: http://www.lhqzj.com
| 
